Biz’Gel max sealing gel
- Technical specifications
- Safety data sheet (SDS)
- Declaration of conformity
- RoHS Declaration
Dielectric strength: > 20 kV/mm.
Voltage: up to 1 kV.
Installation temperature: -10 °C to +55 °C.
Operating temperature after polymerisation: -60 °C to +200 °C.
Fast reticulation: 15 minutes approx. at 25 °C.
- Status Actif
- Net volume 1l
- Norme EN 60529
SELF-AMALGAMATING and REUSABLE bi-component gel.
Contained in a single bottle with separation.
The 2 components must be mixed with a 1:1 ratio.
Avantages :
Reusable!
Self-amalgamating.
Sets quick (according to temperature).
Easily re-accessible.
Non toxic.
No shelf-life.
Application(s) :
Sealing and insulation of electrical connections.
Ideal for sealing junction boxes outdoors or in damp environments.
Methode of use :
Pour into the container supplied the 2 components with a 1:1 ratio.
Mix (1 minute maximum).
Pour the content of the container within 1 minute maximum.
At 25 °C, the product converts into a gel in 15 minutes approx.
Advice :
For optimum polymerisation, mix BIZ'GEL MAX at a temperature close to 25 °C.
Polymerisation may be longer if the product is conditioned at lower temperatures.
IP68 index only if used in appropriated casing.
BIZ'GEL MAX sealing gel 1 l
Go straight to rexel.co.uk